- HomeWaterway Wet Ends
$32.00
Aqua-Flo Circ Master 1HP Hi-Flo Impeller
Genuine replacement 1hp impeller for the Aqua-flo Circ-Master circulation pump wet ends designed specifically for use with Hot Tubs & Spas. These 1hp impellers will fit either the Circ-Master HP or Circ-Master CP pump wet ends but you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP – 1hp
- Vein Gap Distance – 5mm
- Intake Outer Diameter – 44mm
- Diameter – 95mm
- Length – 90mm
- Colour Dot ID – Orange
$32.00
Aqua-Flo Circ Master 2 HP Hi-Flo Impeller
Genuine replacement 2hp impeller for the Aqua-flo Circ-Master circulation pump wet ends designed specifically for use with Hot Tubs & Spas. These 2hp impellers will fit either the Circ-Master HP or Circ-Master CP pump wet ends but you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP – 2hp
- Vein Gap Distance – 12mm
- Intake Outer Diameter – 40mm
- Diameter – 90mm
- Length – 92mm
- Colour Dot ID – Blue
$32.00
Aqua-Flo Circ Master Circ-Master HP and CP CE
Genuine replacement 2hp impeller for the Aqua-flo Circ-Master circulation pump wet ends designed specifically for use with Hot Tubs & Spas. These 2hp impellers will fit either the Circ-Master HP or Circ-Master CP pump wet ends but you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP – 2hp
- Vein Gap Distance – 12mm
- Intake Outer Diameter – 40mm
- Diameter – 90mm
- Length – 92mm
- Colour Dot ID – Blue
$32.08
Aqua-Flo FM XP2 2HP Impeller
Genuine replacement 2hp impeller for the Aqua-flo Flo-master XP2 pump wet ends designed specifically for use with Hot Tubs & Spas. These 2hp impellers will ONLY fit the XP2 pump wet ends and you should fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP – 2hp
- Vein Gap Distance – 6mm
- Intake Outer Diameter – 53mm
- Diameter – 110mm
- Length – 80mm
- Colour Dot ID – Blue/Blue
$32.08
Aqua-Flo FM XP2 3HP Impeller
Genuine replacement 3hp impeller for the Aqua-flo Flomaster XP2 pump wet ends designed specifically for use with Hot Tubs & Spas. These 3hp impellers are the most common in Europe and will ONLY fit the XP2 pump wet ends, you should always fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP – 3hp
- Vein Gap Distance – 11mm
- Intake Outer Diameter – 53mm
- Diameter – 110mm
- Length – 80mm
- Colour Dot ID – Green/Green
$31.00
Aqua-Flo XP2e CE Pump Impeller 1.5hp
Genuine replacement 1.5hp impeller for the European Aqua-flo XP2e CE pump wet ends designed specifically for use with Hot Tubs & Spas. These 1.5hp impellers will only fit the new blue XP2e pump wet ends and you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP – 1.5hp & 2hp @ 60Hz
- Vein Gap Distance – 10mm
- Intake Outer Diameter – 66mm
- Diameter – 102mm
- Length – 83mm
- Colour Dot ID – Blue/Silver
$32.00
Aqua-Flo XP2e CE Pump Impeller 2hp
Genuine replacement 2hp impeller for the European Aqua-flo XP2e CE pump wet ends designed specifically for use with Hot Tubs & Spas. These 2hp impellers will only fit the 6.1 wet ends and the new blue CE XP2e pump wet ends and you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP -2hp 50hz & 3hp @ 60Hz
- Vein Gap Distance – 13mm
- Intake Outer Diameter – 60mm
- Diameter – 115mm
- Length – 83mm
- Colour Dot ID – Silver/Silver
$32.00
Aqua-Flo XP2e CE Pump Impeller 3hp
Genuine replacement 3hp impeller for the Aqua-flo Flomaster XP2 pump wet ends designed specifically for use with Hot Tubs & Spas. These 3hp impellers are the most common in Europe and will ONLY fit the XP2 pump wet ends, you should always fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP – 3hp @ 60Hz
- Vein Gap Distance – 11mm
- Intake Outer Diameter – 53mm
- Diameter – 110mm
- Length – 80mm
- Colour Dot ID – Green/Green
$28.82
Aqua-Flo XP2e Flomaster Impeller 2.5hp
Genuine replacement 2.5hp impeller for the modern Aqua-flo Flomaster XP2e pump wet ends designed specifically for use with Hot Tubs & Spas. These 2.5hp impellers will ONLY fit the modern XP2e pump wet ends and you should always fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP -2.5hp
- Vein Gap Distance – 11mm
- Intake Outer Diameter – 60mm
- Diameter – 102mm
- Length – 83mm
- Colour Dot ID – Silver/White
$119.09
Waterway 2HP Centre Discharge Wet End (1.5 x 1.5)
Genuine direct replacement Waterway 48 Frame centre discharge pump wet end with an internal 2hp rated impeller. This unique wet end model has 1.5-inch connections on both the inlet and outlet plumbing union connections (1.5 inch = 63mm thread OD). This type of Waterway wet end is found on 1.5hp & 2hp Waterway E-series hot tub pumps here in the UK & Europe.
Has been used in the past on very old Coast Spas, ideal for pumps found on Dream Maker Spas and others.
- Plumbing connections: 1.5inch
- Wet End Frame Size – 48
- Wet End Type – Centre Discharge
- Wet End Horse Power – 2HP
- Length: 180 mm Height: 175mm Width: 130 mm
- Commonly used with: very old Coast Spas, ideal for pumps found on Dream Maker Spas and others.
$113.59
Waterway 2HP Side Discharge Wet End (1.5 x 1.5)
Genuine direct replacement Waterway 2HP Side Discharge Wet End (1.5 x 1.5) with an internal 4hp rated impeller. The Viper pump is mainly used on Swim spas for swim against swim jets. It has a unique Waterway wet end that has large 2.5-inch plumbing union connections on both the inlet and outlet, (Thread OD – 93mm).
This type of Waterway Wet End is found on 1.5HP & 2HP Waterway E-series Centre Discharge – 48 F – hot tub pumps here in the UK & Europe.
- Plumbing connections: 2.5 inch
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 4HP
- Commonly used with: Will fit motors made by brands such as EMG, EME, AO Smith, Franklin Electric, Century Laser, US Motors & Emerson. Does NOT fit Chinese manufactured motors from WP500-II LX pumps.
$121.20
Waterway 48f 4HP Hi-Flo Wet End (2×2) HA440 Replacement
Genuine direct replacement Waterway 48 Frame pump Hi-Flo wet end with 2-inch plumbing union connections on both the inlet and outlet (78mm thread OD). The Waterway Hi-Flo wet end is a powerful yet compact wet end with a large-sized 4hp rated impeller. This type of Waterway wet end is found on 1.5hp and 2hp Waterway Hi-Flo hot tub pumps and they are Waterway’s most common European 48 frame pump. This Hi-Flo wet end can be found on Beachcomber spas, Spaform Hot Tubs & others.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horse Power – 4HP
- Length: 190 mm Height: 120mm Width: 170 mm
- Commonly used with:This Hi-Flo wet end can be found on Beachcomber spas, Spaform Hot Tubs & others.
$112.92
Waterway 56f 4HP Wet End Assembly (2.5 x 2)
Genuine direct replacement Waterway 56 Frame pump wet end with an internal 4hp rated impeller. This is the less common model that has a larger 2.5-inch inlet and 2-inch outlet plumbing union connections. 2-inch and 2.5- inch are just plumbing terms the diameters of the threaded connections are 78mm x 93mm.
This type of Waterway wet end is found on 2hp Waterway Executive hot tub pumps here in the UK & Europe.
- Plumbing connections: 2.5 (intake) x 2 inch (outlet)
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 5HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with: Will fit motors made by brands such as EMG, EME, AO Smith, Franklin Electric, Century Laser, US Motors & Emerson. Does NOT fit Chinese manufactured motors from LX pumps.
$105.73
Waterway 56f 4HP Wet End Assembly (2×2)
Genuine direct replacement Waterway 56 Frame pump wet end with internal 4hp rated impeller and 2-inch plumbing union connections on both the inlet and outlet (78mm thread OD). This type of Waterway wet end is found on 2hp Waterway Executive hot tub pumps here in the UK & Europe.
- Plumbing connections: 2.5 (intake) x 2 inch (outlet)
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 5HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with: Will fit motors made by brands such as EMG, EME, AO Smith, Franklin Electric, Century Laser, US Motors & Emerson. Does NOT fit Chinese manufactured motors from LX pumps.
$106.02
Waterway 56f 5HP Wet End Assembly (2.5×2)
Genuine direct replacement Waterway 56 Frame pump wet end with an internal 5hp rated impeller. This is the less common model that has a larger 2.5-inch inlet and 2-inch outlet plumbing union connections. 2-inch and 2.5- inch are just plumbing terms, the diameters of the threaded connections are 78mm x 93mm.
This type of Waterway wet end is found on 2.5hp and 3hp Waterway Executive hot tub pumps here in the UK & Europe.
- Plumbing connections: 2.5 (intake) x 2 inch (outlet)
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 5HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with: Will fit motors made by brands such as EMG, EME, AO Smith, Franklin Electric, Century Laser, US Motors & Emerson. Does NOT fit Chinese manufactured motors from LX pumps.
$117.96
Waterway 56f 5HP Wet End Assembly (2×2)
Genuine direct replacement Waterway 56 Frame pump wet end with internal 5hp rated impeller and 2-inch plumbing union connections on both the inlet and outlet (78mm thread OD). This type of Waterway wet end is found on 2.5hp & 3hp Waterway Executive hot tub pumps here in the UK & Europe.
- Plumbing connections: 2 Inch
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 5HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with: This type of Waterway wet end is found on 2.5hp & 3hp Waterway Executive hot tub pumps here in the UK & Europe.
